• For use with Refrigerated Trailers
• 20,000 lb capacity
• 17" Lip Length
• 72" Usable Width
• 94" Overall Width

Fast and easy to operate, Bluff's edge of dock leveler (Ramp) is positioned by lifting a self-storing handle and pulling the handle to the dock floor.  The latch assembly activates the lip forward to the floor of the trailer as the handle is lifted.  When released, the handle automatically returns to a stored position. 

Bluff's edge of dock leveler is designed to have a working range of 5" above and 5" below dock level. Because of gradability problems, dock levelers are not recommended for use with pallet jacks or stackers.

	20EP72-R    Suited for new construction or replacement of an existing dock leveler. Includes: EZ-Pull 20EP72-R Optional Fastener Kit for installation of the leveler. Consists of 9 each 3/4" x 4" wedge anchor bolts including the nuts and washers. 20EP72-R With Installation Kit    Suited for installation of existing docks without pre-set steel channels for welding. Includes: EZ-Pull 20EP72-R Approach Plate: 12" deep beveled approach plate 120" wide with 5 each 13/16" counter sunk holes for mounting to top of dock. Fastener Kit: Consists of 9 each 3/4"x4" wedge anchor bolts including the nuts & washers. Also consists of 5 each 1/2"x13x3" flat head socket screws and 5 each 1/2" double expansion   Edge of Dock Leveler Cut Sheet