Loading Dock Equipment - Steel Dockboards

Cart

Empty

1-800-741-1258
Mon-Fri
8:00-7:00 EST

Instant credit to all government agencies.

Loading Dock Equipment, Bumpers, Lighting, Dock Lighting, Dock Boards 1

Dock Bumpers

Dock Levelers

Dock Ramps & Boards

Industrial Lighting

Safety Rail

Protective Railing

Strip Doors

Wheel Risers

Steel DockBoards

Fully welded steel dockboard provides a safe ramp for heavy duty applications. Selecting the proper Bluff product for your application will improve product life, safety, and loading efficiency. Review the product selection guide on the bottom of this page prior to ordering to ensure your product selection is correct.

Steel DockBoard (SC)

Steel plate with welded steel curbs
Lifting chains included
Capacity 10,000 pounds

This steel dockboard with welded steel curbs and locking legs is designed for 3,000 pound capacity forklift use. Lifting chains are included. Width of 60". Lengths from 36" to 72".

Click the picture go to Model SC page

Steel Dockboard (T)

All-welded steel construction
Capacities from 15,000 to 40,000 pounds
Two four-hole pin pockets placed on each edge
Fold-down lifting loops
Double-bend design

This heavy-duty steel dockboard is held in position using two 1" stress-proof steel pins. When properly placed in the side pocket location holes, these pins hold the dockboard firmly in place guarding against slippage. Simply select the proper pin hole location for use with conventional, refrigerated, or container trailers, or for below dock conditions. Widths from 60" to 84".

Steel Dockboard (TFL)

Same basic design as the "T" dockboard, but uses locking legs in lieu of steel pins.
Not recommended for below dock loading.

Steel DockBoard (TNB)

Single-bend design utilizes the lifting chain and full width locking legs.
Not recommended for below dock loading.

Steel HandyBoard (H)

Capacity of 10,000 pounds
All-welded steel construction
Two handles for hand positioning
Full-width locking legs

Two men or a forklift can easily place the board between the dock and the trailer. Width of 60". Lengths from 30" to 36".

Red Pin Steel DockBoard (C)
The red pin dockboard utilizes full length side pockets along with two locking pins for each side. These pins provide safe loading conditions for container and park-out applications. Widths from 60" to 84". Lengths from 48" to 96". (Click the picture to proceed to our Red Pin Steel Dock Boards)

For difficult trailer-to-dock positions
Dual-pin locking system
All-welded steel construction
Capacities from 15,000 to 40,000 pounds

SELECTION GUIDE

Choosing the correct Size and Capacity of equipment helps improve your dock operation. The following guidelines will help you determine what equipment best suits your individual needs.

Dock Plates

LENGTH

To determine the proper length of a dockboard or dockplate, three items are required.

Dock Height (D)
Height of highest truck (T)
Type of loading equipment used.

Dock Plates Width

CAPACITY

Stackers and other narrow aisle loaders should not be used on a dockboard.
Paper roll clamp and multi-shift loading add 5,000 pounds to the board capacity.
Capacity rated fro single-shift operation at a 3 mile per hour maximum rate of travel.

Live chat is available
Mon - Fri
8 am to 7 pm EST

Customized Quote

Stop and Go Lights
Stop and Go Lights
for the modern loading
dock.

sales@loadingdocksupply.com
Contact Us

1-800-741-1258

PO Box 15
Ashley, OH 43003

Serving Ohio, Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming

Loading Dock Equipment